
| Model | NZSE20A-01 | NZSE20A-01 | ||
| Rated pressure range | 0~-101kPa | 0.000N~-1.000M Pa | ||
| Display/Set pressure range | 10~-101kPa | -0.000N~-1.000M Pa | ||
| Withstand pressure | 300kPa | 1.5M Pa | ||
| Applicable fluid | Air, Non-corrosive gas, Non-flammable gas | |||
| Battery | Button battery | |||
| Display light | Non | Non | ||
| Battery lifespan | 5 years(5 times/day) | |||
| Detection of low battery | Yes | |||
| Battery replacement | Accept | |||
| Display time | 35s | |||
| Sampling frequency | 2Hz(2 times/s) | |||
| Pressure Unit | Psi,bar,mmHg,Kpa | Psi,bar,kgf/cm2 ,Mpa | ||
| Repeatability | +1%F.S. +1 digit/2 | +0.2%F.S. +1 digit | ||
| Main screen | 31/2 digits (7 segments) | |||
| Display accuracy | ±2% F.S. ±1 digit (Ambient temperature of 25 ±3°C) | |||
| Environment | Enclosure | IP65 | ||
| Operating temperature range | Operating: −5 to 50°C, Stored: −10 to 60°C (No condensation or freezing) | |||
| Operating humidity range | Operating/Stored: 35 to 85%RH (No condensation) | |||
| Post size | 01:R1/8",M5;02:NPT1/8",#10-32 UNF;G1/8"(BSPP),M5 04:R1/4",M5;02:NPT1/4",#10-32 UNF;G1/4"(BSPP),M5 | |||
| Weight | 40g | |||

| Model | NZSE30A(Vacuum pressure) | NZSE30AF(Compound pressure) | NISE30A(Positive pressure) | |||
| Rated pressure range | 0.0~-101.0 KPa | 100.0~100.0 Kpa | 0.100~1.000 MPa | |||
| Display/Set pressure range | 10.0~105.0 Kpa | 105.0~105.0 Kpa | 0.105~1.050 MPa | |||
| Withstand pressure | 500 Kpa | 500 Kpa | 1.5 MPa | |||
| Display/Minimum unit setting | 0.1 Kpa | 0.1 Kpa | 0.001 MPa | |||
| Applicable fluid | Air,Non-corrosive gas,Non-flammable gas | |||||
| Power supply voltage | 12 to 24 VDC±10%,Ripple(p-p)10%or less(with power supply polarity protection) | |||||
| Current consumption | 40 mA or less | |||||
| Switch output | NPN or PNP open collector 1 output,NPN or PNP open collector 2 outputs | |||||
| Maximum load current | 80 mA | |||||
| Maximum applied voltage | 28V(at NPN output) | |||||
| Residual voltage | 1 Vor less(with load current of 80 mA) | |||||
| Response time | 2.5 ms or less(with anti-chattering function:20,100,500,1000,2000 ms) | |||||
| Short circuit protection | Yes | |||||
| Repeatability | 10.2%F.S.±1 digit | |||||
| Hystere- sis | Hysteresis mode | Variable(0 or above) | ||||
| Window comparator mode | ||||||
| Analog output | Voltage output | Output voltage(Rated pressure range) | 1 to 5V+2.5%F.S. | 0.6 to 5V±2.5%F.S. | ||
| Linearity | ±1%F.S. | |||||
| Output impedance | Approx.1 kΩ | |||||
Current output | Output curent(Rated pressure range) | 4 to 20 mA ±2.5%F.S. | 2.4 to 20 mA ±2.5%F.S. | |||
| Linearity | ±1%F.S. | |||||
| Load impedance | Der wer Maximum load impedance:Power supply voltage 12 V:300 2,Power supply voltage 24 V:600 2 Minimum load impedance:5052 | |||||
| Display | 4-digit,7-segment,2-color LCD(Red/Green) | |||||
| Display accuracy | ±2%F.S.±1 digit(Ambient temperature of 25±3°C) | |||||
| Indicator light | Lights up when switch output is turned ON.OUT1:Green,OUT2:Red | |||||
| Environ- ment | Enclosure | IP40 | ||||
| Operating temperature range | Operating:0 to 50C,Stored:-10 to 60°C(No freezing or condensation) | |||||
| Operating humidity range | Operating/Stored:35 to 85%RH(No condensation) | |||||
| Withstand voltage | 1000 VAC for 1 minute between terminals and housing | |||||
| Insulation resistance | 50 M2 or more(500 VDC measured via megohmmeter)between terminals and housing | |||||
| Temperature characteristics | ±2%F.S.(25°C reference) | |||||
| Lead wire with connector | Oilproof heavy-duty vinyl cable,3 cores 03.5,2m 4 cores Conductor area:0.15 mm(AWG26),Insulator O.D.:1.0 mm | |||||
| Standards | CE,UL/CSA(E216656),RoHS | |||||

| Model | NSE40A(vacuum pressure) | NSE40AF(compound pressure) | NISE40A(positive pressure) | ||
| Rated pressure range | 0.0 ~101.3 KPa | 100.0~100.0 KPa | 0.100~1.000 MPa | ||
| Display/Set pressure range | 10.0~105.0 KPa | 105.0~105.0 KPa | 0.105~1.050 MPa | ||
| Withstand pressure | 500 KPa | 500 KPa | 1.5 MPa | ||
| Display/Minimum unit setting | 0.1 Kpa | 0.1 Kpa | 0.001 MPa | ||
| Applicable fluid | Air,Non-corrosive gas,Non-flammable gas | ||||
| Power supply voltage | 12 to 24 VDC ±10%,Ripple(p-p)10% or less(with power supply polarity protection) | ||||
| Current consumption | 45 mA or less | ||||
| Switch output | NPN or PNP open collector 1 output or 2 outputs | ||||
| Maximum load current | 80 mA | ||||
| Maximum applied voltage | 28 V (at NPN output) | ||||
| Residual voltage | 1 V or less | ||||
| Response time | 2.5 ms(with anti-chattering function:20,100,500,1000,2000 ms) | ||||
| Short circuit protection | Yes | ||||
| Repeat accuracy | +0.2%F.S.+1 digit | ||||
| Hysteresis | Hysteresis mode | Variable(O or above) | |||
| Window comparator mode | |||||
| Analog output | Voltage output | Output voltage (Rated pressure range) | 1 to 5V+2.5% F.S. | 0.6 to 5V+2.5% F.S. | |
| Linearity | ±1% F.S. | ||||
| Output impedance | Approx.1 kΩ | ||||
Current output | Output current (Rated pressure range) | 4 to 20 mA ±2.5%F.S. | 2.4 to 20 mA ±2.5% F.S. | ||
| Linearity | ±1%F.S. | ||||
| Load impedance | Maximum load impedance:300 Ω(Power supply voltage 12 V) 600 Ω(Power supply voltage 24 V) Minimum load impedance:50Ω | ||||
| Auto-shift input | Non-voltage input(Reed or Solid state),Low level:0.4 V or less,5 ms or longer input | ||||
| Display | 3 1/2-digit,7-segment,2-color LCD(Red/Green) | ||||
| Display accuracy | ±2%F.S.+1 digit(Ambient temperature of 25 +3°C) | ||||
| Indicator light | Lights up when output is tuned ON.OUT1,OUT2:Orange | ||||
| Environment | Enclosure | IP65 | |||
| Operating temperature range | Operating:-5 to 50C,Stored:-10 to 60°C(No freezing or condensation) | ||||
| Operating humidity range | Operating/Stored:35 to 85% RH(No condensation) | ||||
| Withstand voltage | 1000 VAC for 1 minute between terminals and housing | ||||
| Insulation resistance | 50 MΩ or more(500 VDC measured via megohmmeter) between terminals and housing | ||||
| Temperature characteristics | ±2%F.S.(25C reference) | ||||
| Lead wire | Oilproof heavy-duty vinyl cable 5 cores ø3.5, 2 m Conductor area: 0.15 mm2 (AWG26) Insulator O.D.: 0.95 | ||||

| Model | NISE80 | NISE80H | NZSE80 | NZSE80F | ||
| Rated pressure range | 0.1 ~ 1 MPa | 0.1 ~ 2 MPa | 0 ~ 101KPa | 100 ~- 100KPa | ||
| Display/Set pressure range | 0.1 ~ 1.1 MPa | 0.1 ~ 2.2 MPa | 10 ~ 111KPa | 110 ~- 110KPa | ||
| Withstand pressure | 2 MPa2 | 4 Mpa | 500 kPa | |||
| Wetted parts material | Pressure sensor: Stainless steel 630, Fitting: Stainless steel 304 | |||||
| Port siz | Rc1/8 Piping direction: Rear/Bottom | |||||
| Power supply voltage | 12 to 24 VDC ±10%,Ripple(p-p)10% or less(with power supply polarity protection) | |||||
| Current consumption | 40 mA or less | |||||
| Switch output | NPN or PNP open collector 1 output or 2 outputs | |||||
| Maximum load current | 80 mA | |||||
| Maximum applied voltage | 28 V (at NPN output) | |||||
| Residual voltage | 1 V or less | |||||
| Response time | 2.5 ms(with anti-chattering function:20,100,500,1000,2000 ms) | |||||
| Short circuit protection | Yes | |||||
| Repeat accuracy | +0.2%F.S.+1 digit | |||||
| Hysteresis | Hysteresis mode | Variable(O or above) | ||||
| Window comparator mode | ||||||
| Analog output | Voltage output | 0.6 ~ 5 V ±2.5% F.S. | 0.8 ~ 5 V ±2.5% F.S. | 1 ~ 5 V ±2.5% F.S. | ||
| 0.6 ~ 5.4 V | ||||||
| Output impedance | Approx.1 kΩ | |||||
| Current output | 2.4 ~ 20 mA ±2.5% F.S. | 3.2 ~ 20 mA ±2.5% F.S. | 4 ~ 20 mA ±2.5%F.S. | |||
| 2.4 ~ 21.6mA | ||||||
| Load impedance | Maximum load impedance:300 Ω(Power supply voltage 12 V) 600 Ω(Power supply voltage 24 V) Minimum load impedance:50Ω | |||||
| Display | 3 1/2-digit,7-segment,2-color LCD(Red/Green) | |||||
| Display accuracy | ±2%F.S.+1 digit(Ambient temperature of 25 +3°C) | |||||
| Indicator light | Lights up when output is tuned ON.OUT1,OUT2:Orange | |||||
| Enclosure | IP65 | |||||
| Operating temperature range | Operating:-5 to 50C,Stored:-10 to 60°C(No freezing or condensation) | |||||
| Operating humidity range | Operating/Stored:35 to 85% RH(No condensation) | |||||
| Withstand voltage | 250 VAC for 1 minute between terminals and housing | |||||
| Insulation resistance | 2M or more (50 VDC measured via megohmmeter) between terminals and housing | |||||
| Temperature characteristics | ±3% F.S. (25°C reference, within operating temperature range) | |||||
| Lead wire | Oilproof heavy-duty vinyl cable 5 cores ø3.5, 2 m Conductor area: 0.15 mm2 (AWG26) Insulator O.D.: 0.95 mm | |||||






