Our check valve is economically priced but with higher quality and capability than most at this market
Product Feature:
Pressure seal design.
Unique cage unit: entire seat-hinge-pin-disc assembly can be tested outside the valve before seal welding into the body. Eliminates pin seal leakage.
Easy in-line service.
Efficient operation. The hinge pin located near the center of gravity allows the conical seating face of the disc to move out and into the seat rapidly without sliding or wear. The disc pivots through a small arc preventing backflow and "water hammer".
Superior tightness: conical, lapped-in hardfaced seating is self-aligning. Valve can be used even in vertical piping with flow up.
Technical Parameters:
Main Material:
Executive Standard:
COMPANY INTRODUCTION
**Company Goal : OEM service for world-famous valve brand
*Design & Development ability -- SolidWorks, Pro / E, AutoCAD etc
Dimension Measurement &Inspection
Assembly Workshop
Packaging
Certificates -- CE ISO WRAS ACS certificates
Product Feature:
Pressure seal design.
Unique cage unit: entire seat-hinge-pin-disc assembly can be tested outside the valve before seal welding into the body. Eliminates pin seal leakage.
Easy in-line service.
Efficient operation. The hinge pin located near the center of gravity allows the conical seating face of the disc to move out and into the seat rapidly without sliding or wear. The disc pivots through a small arc preventing backflow and "water hammer".
Superior tightness: conical, lapped-in hardfaced seating is self-aligning. Valve can be used even in vertical piping with flow up.
Technical Parameters:
Size | DN50-DN900 | |
Working pressure | 16Bar | 10Bar |
Shell | 24Bar | 15Bar |
Seal | 18Bar | 11Bar |
Operating Temperature | -10ºC~+120ºC | |
Operating Environment | Ballast and bilge system Chemical processing Desalination plants Drilling rigs Drinking waterDry powder Food and beverage Gas plants HAVC Mining industry Paper industry Sand handling Seawater Sugar industry Thermo technical water treatment Waste water |
Main Material:
Name | Material |
Body | Cast Iron Ductile Iron Carbon Steel Stainless Steel AL-Bronze |
Disc | Ductile Iron Carbon Steel Stainless Steel AL-Bronze |
Pin | Stainless Steel Monel K500 |
Seat | BUNA NBR EPDM VITON HEPDM Neoprene Hypalon Natural rubber |
Executive Standard:
Design Standard | EN12334 EN14341 |
Inspection & Test | EN12266-1 ISO5208 |
End Standard | ANSI B16.1 125LB BS4504 PN10 & PN16 EN1092-2 PN10 & PN16 AS 2129-2000 Table D Table E ISO 7005 PN10 & PN16 ASME B16.5 150LB JIS B2220 5K/10K |
Face to Face | EN558-1 Series16 ISO 5752 Series16 ANSI B16.10 GB/T12221 DIN3202 K3IN3202 |
COMPANY INTRODUCTION
**Company Goal : OEM service for world-famous valve brand
*Design & Development ability -- SolidWorks, Pro / E, AutoCAD etc
Dimension Measurement &Inspection
Assembly Workshop
Packaging
Certificates -- CE ISO WRAS ACS certificates